使用IAR编译TI SensorDemo注意事项

使用TAR编译TI官方Zigbee程序"SensorDemo"时,应该保证以下条件同时满足,才能编译成功:

参考:CC2530ZDK_Sensor_Demo_Users_Guide.pdf

1.• Z-Stack 2.3.1 for CC2530. This software can be downloaded from the Z-Stack product folder on the web.

2.• IAR Embedded Workbench for 8051 version 7.51. A free 30 days evaluation is available on
www.iar.com/ew8051. The CC2530ZDK also includes a CD with this software. Refer to the
CC2530ZDK User's Guide for further information.

以上是参考的官方文档

--------------------------------

以下是博主实际安装经验加上对官方文档的理解:

1.Z-Stack 2.3.1 For CC2530 (博主曾经用Z-Stack2.4.0编译一直不能通过,提示"Error[e46]: Undefined external "macPib" referred in mac_beacon ( C:\Texas Instruments\ZStack-CC2530-2_4_0-1-4_0\Projects\zstack\Libraries\TIMAC\bin\TIMAC-CC2530.lib ) ")

2.IAR Embedded Workbench for 8051 7.51 A ,使用其他版本会提示版本太旧

3.安装协议栈时,碰到一直显示"configurate dotnetfx " ,不知道其他人是怎么处理的,反正博主是直接重启电脑再装就好了.

4.云端软件平台会和.netframework冲突,如果运行了云端,一定要关掉云端(net stop cloudserver),清除云端信息,重启电脑才能成功安装Z-Stack协议栈.

原创文章,转载请注明出处.